VATIRO Air Heater

PROFESSIONAL CABIN HEATING

Overview

VATIRO T2000 — Diesel Air Heater

Cabin comfort. Wherever the road takes you.

The ATLOSON VATIRO T2000 is a compact diesel air heater designed to bring warmth to truck cabs, camper vans, service vehicles and other compatible mobile applications.

With up to 2 kW of heating output, it supplies warm air to the interior without requiring the vehicle’s engine to idle. Its compact dimensions and 12 V electrical configuration make it an option for vehicle conversions, cabin heating projects and mobile workspaces.

• Heating independent of the engine — Maintain cabin warmth while parked without running the vehicle’s engine solely for heat.
• Dedicated warm-air heating — Supplies heated air directly to the interior.
• Automatic temperature regulation — Adjust the temperature setting between 5°C and 35°C (41°F–95°F).
• Compact installation footprint — A heater body measuring 323 × 120 × 121 mm helps accommodate installations where space matters.
• 12 V configuration — Designed for compatible vehicle electrical systems.

Performance Specifications

Specifications for the selected ATL1001 configuration.

The temperature setting range refers to the selected cabin temperature, not the heater’s permitted ambient operating temperatures. Use the installation instructions applicable to your heater and controller for electrical supply, wiring and installation requirements.

OEM & Fleet Integration

Plan the VATIRO T2000 into professional vehicle installations, specialty vehicles, vans, work trucks and compatible fleet equipment. Match the heater, controller, electrical supply and fuel configuration to the application.

Quiet Operation

Cabin heating with the engine stopped supports overnight comfort in sleeper cabs and compatible RV installations. Careful mounting, fuel-pump support and clear air routing help manage vibration and operating noise.

The selected kit includes a fuel-pump damper and support.

Recommended Applications

Select the heater according to the space being heated, insulation and expected outdoor temperatures.

What’s Included

Your ATLOSON VATIRO T2000 package includes the heater, digital controls, fuel delivery components, air intake and exhaust components, mounting hardware, and electrical connections required for a standard installation.

Installation note: Additional mounting hardware, ducting, fittings, electrical components or fuel-system parts may be required depending on the vehicle and installation layout.

Designed to Be Serviceable

Replaceable service components support maintenance and repairs. Check the model, fuel, voltage and component revision before ordering; internal service requires a qualified workshop.

Burners are excluded from warranty coverage.

Compliance & Testing

Contact ATLOSON for the supporting documentation applicable to your model and installation.

Delivery & Warranty

Delivery time and charges depend on the destination, available stock and selected options. Contact ATLOSON for an estimate.

ATLOSON Warranty

The VATIRO T2000 is covered against defects in materials and workmanship under normal use, according to the following warranty periods. Burners are excluded from warranty coverage.

Both warranty periods begin on the date of final sale to the end customer, as shown on the proof of purchase.

Installation

On receipt, record the SKU, serial number, voltage, fuel and controller revision, and photograph the nameplate. Check the heater, harness, controller, pump, pipes, seals and fasteners actually supplied. Prepare maintenance access, protected routing, a suitable electrical supply and combustion exhaust outside the occupied space.

Separate combustion intake from heated air. Protect bodywork penetrations, prevent exhaust recirculation and check duct routing and clear grilles.

Prepare and secure: Choose a rigid base. Check clearance for ducts and maintenance. Position the supplied gasket and template before drilling. Separate the occupied cabin from the combustion area.

Distribute warm air: Keep the return-air route unobstructed. Secure ducts without crushing them and protect outlets from luggage. Avoid routing hot outlet air directly back into the inlet.

Install the fuel system: Secure the tank, pickup, filter and pump compatible with the selected variant. Cut tubing cleanly and insert both ends fully into the connection to prevent air bubbles. Keep fuel lines away from hot components.

Install combustion intake and exhaust: Use the supplied pipes. Secure their ends and route exhaust outside the vehicle, away from windows, doors and air inlets. Allow condensate drainage as specified for the installation; avoid water traps and contact with fuel lines.

Connect and test: Connect the protected harness and compatible AT1192 controller. Check polarity and voltage under load. Complete ignition, stable operation and the full shutdown cycle; check for odours, leaks and overheating.

Commissioning

Check mounts, connections, protective devices and seals before starting. Bleed or prime only as instructed in the manual. Measure voltage at the appliance during startup; check stable operation, temperatures and unusual smoke or leaks. Test controlled shutdown and completion of cooling, recording conditions, measurements and serial number.

Operation

Before travel or overnight use: Check fuel, battery charge and air inlets/outlets. Remove snow, mud or luggage that could obstruct ducts. Verify exhaust does not terminate beneath a window, door or air inlet.

Start and adjust: Switch on with the compatible controller and let ignition finish. Select thermostat or constant-power operation only if available. Older rotary controllers and AT1192 may use different sequences.

During heating: Monitor warm air, odours and noise. Do not close ducts needed for minimum airflow. If a sensor in a warm-air pocket stops heating prematurely, correct its position rather than changing combustion settings.

Shutdown and storage: Stop using the controller and wait for cooling to finish before isolating the main power. Follow the T2000 monthly maintenance cycle and operating-hours guidance in its maintenance documentation. Confirm intervals for other versions with ATLOSON.

Maintenance

Before use, check power, fuel, ducts and leaks. After moving, inspect mounts and fittings. Before the season, perform a supervised test and inspect the circuit. Allow the shutdown cycle and cooling to finish before maintenance. Follow the variant’s manual for dismantling and intervals.

Before the season, inspect mounts, wiring, pipes, outlets and protective devices; check leaks and corrosion. Clean grilles and remove obstructions without changing combustion settings. Before storage, follow water-system drainage and antifreeze procedures. After service, inspect seals and leaks, test operation and shutdown. Exact intervals depend on the variant’s manual and use.

Troubleshooting & Support

Record the exact error code, a screen photograph, voltage at rest and startup, symptoms and circumstances. Check supply/connectors, fuel, intake and exhaust; on coolant systems, also check filling, bleeding and circulation. Use the installed controller’s code table; do not interchange OLED, LCD and AT1192 codes. Stop for leaks, odours or overheating and obtain professional diagnosis before replacing electronics.